impra Profilan Opac Satin Paint
BEAUTIFUL COLOURED PROTECTION FOR YOUR INTERIOR AND EXTERIOR SURFACES.
A highly versatile product for new and previously painted timber. Leaves a semi-matt film that moves with its substrate. Designed to withstand extreme weather condiitons whilst the surface texture of the wood remains charmingly visible. The end result is an attractive and eye-capturing coloured finish.
impra Profilan Opac is ideal for protecting all interior and exterior stable (Windows, Exterior Doors, Conservatories, Beams, Framework, Eaves, Cladding, Beach Huts) and semi-stable surfaces (Gates, Shutters, Garden Sheds, and Panel Fencing).
When used with the appropriate pre-treatment is also suitable for treating brickwork, concrete, plaster, PVC, Zinc and Galvanised Steel. It can be used as a subsequent coat to impra Profilan Secur white primer or impra Profilan Prevent clear biocidal primer.
- High Opacity & Coverage
- Excellent adhesion on sound previously painted surfaces
- Effective film protection against mould and algae
- Certified according to DIN EN 927-2
- Block Resistant
- Quick drying, durable, long-life finish
|Coverage||10m2 per litre|
|Application||Brush, Roller, Pad|
|Drying Time||Touch dry in 60 minutes @ 23°C. Dry to handle in 2 hours|
|Cleanup||Clean directly after use with water or washing up liquid|
|Storage||1 Year if can kept dry and firmly shut|
Imperfect, loose coating must be completely removed. Intact coating should be completely sanded.
We recommend a medium grit (P100-150) sandpaper. We have a range of handy D.I.Y friendly packs of abrasives exclusive to AllFinishes.
If you are sanding by hand we highly recommend using Klingspor PL 31 B Sandpaper Sheets.
If you are using an orbital sander we recommend Klingspor PS 22 K Velcro Discs.
Stir well before use. Do not dilute. Intermediate rubbing down with a Scotchbrite pad or finer grit sandpaper is recommended. Do not use steel wool.
If prepping exterior surfaces before painting, we recommend Tesa 4440 Precision Outdoor Masking Tape. This tape is ideal for use with impra Profilan Opac, as well as other outdoor paint works.
Please consult the technical data sheet before use.
impra Profilan Opac can be applied by Brushing, Roller or Spraying. We recommend Rodo Prodec Premier Synthetic Brush for excellent pick up & smooth release. Do not apply product too generously.
Allow to dry for approximately 1-2 hours with good ventilation inbetween coats.
You can overcoat with subsequent coats of impra Profilan Opac as well as with normally available commercial waterborne paints. If you are using other paints we advise a trial coat as mixing paint brands may invalidate the integrity of the system.