Bedec MSP Colour Match

Available In Store
  • Tough, durable microporous paint
  • Resists flaking and cracking on many different substrates
  • Bursting with pigments for long-lasting colour retention
  • Water-based, low VOC and minimal odour
  • Quicker drying than oil-based alternatives
  • Non-flammable and resists heat up to 80°C
Your Order:
TOTAL £37.20
TOTAL:£37.20 - £68.55Incl. VAT
Your Order:
Bedec MSP Bespoke Colour

A high quality multi-surface paint which can be colour matched to most known colour ranges.

Colour requests available from most colour ranges, including RAL and British Standard. The £12 tinting cost is applicable per batch, so regardless of quantity you will pay just £12 per tint.

Please enter your colour reference in the colour request field, and if there are any issues we will be in contact to discuss alternatives

Bedec Bespoke colours are not available for next day delivery or paid pre-12 delivery as they are not tinted in- house. Please contact  to check before ordering if the colour can be matched and for the lead time.

Welcome to MSP

Bedec MSP is the ideal protective and decorative coating for most surfaces. The paint uses high quality water-based technology, giving the surface outstanding flexibility to resist flaking or peeling. Multi-Surface Paint leaves a beautiful highly durable finish on any suitable surface, with a big range of colours and finishes to choose from.


Interior and Exterior: Walls and ceilings, radiators, benches, trim, window sills, kitchen and bathroom tiles, railings, cupboards, radiators

Substrate Suitability: Wood, Plastic, Metal, Aluminium, Plaster, Cladding, Stone, Glass, MDF, Melamine, Mild Steel, Iron, Rendering, Terracotta, Concrete, Fibreglass, Timber, UPVC, Galvanised Steel, Lead, Tarmac, Masonry, Slate Asbestos, Chipboard, Plastic Coated Steel, Copper, Zinc, Bitumen, Brick, Ceramic Tiles


Coverage 13–15m² per litre (depending on substrate and porosity)
Application Brush, Roller or Spray application
Drying Time Touch dry in 2–4 hours; dry to recoat in 4 hours @ 23°C
Coats 2 coats
Cleanup Clean directly after using water
Storage 2 years if can kept dry and firmly shut, away from direct sunlight


The substrate must be sound, dry and free from oil and grease. Carry out any structural repairs prior to application of Bedec Multi Surface Paint.

  1. Carry out cleaning with liquid detergent solution rinsed with clean water.
  2. Allow to dry.
  3. Remove any lichen or moss. Brush clean and treat with an Anti-Fungal Wash.
  4. Allow to dry.

Please Note:

  • Plastic, metal, timber and smooth surfaces should be rubbed down with abrasive paper or equivalent.
  • Apply a prime coat to ferrous metals, bare steel and rusty surfaces with Bedec All Metals Primer after appropriate preparation.
  • Treat stains with a stain block prior to painting.
  • Allow new creosote (3 weeks) and galvanised (1 month) to 'weather' before painting.
  • For floor paints we'd recommend that you consider Bedec Acrylic Floor Paint as an alternative.


Apply by synthetic brush (we recommend Wooster Gold Edge Paint Brush), roller (we recommend Wooster Pro/Doo-Z Roller) or conventional/airless spray. No separate primer or undercoat is necessary unless used on ferrous metal (mild steel) or where staining could occur. MSP is self-priming and paint can be applied in both interior and exterior applications. Bedec All Metals Primer is recommended if applied to steel, aluminium and other metals.

For porous substrates, thin the first coat with 30% water for a priming base coat. Do not apply at air or surface temperatures below 8ºC or when foggy or likely to rain before the product has fully dried. Two full coats are recommended

Approximately 12–14 sq. metres/litre, when applied by brush or roller depending on texture and porosity of the substrate.

Airless spraying will considerably reduce this to 6–8 sq. metres/litre (56microns per coat, (corresponding wet film thickness 150 microns).


Touch dry after 2 hours, normally re-coatable after 4 hours at 18°C and 65% RH. Optimum hardness is reached after 2 weeks. Ensure good ventilation during application and drying. 

Clean up: Warm soapy water.


Manufacturer's Part Numbers (MPN):
KA1186, KA1187, KA1188, KA1189, KA1190, KA1191, KA1192, KA1193, KA1194, KA1195, KA1196, KA1197, KA1610, KA1910, KA1911, KA1939, KA1996, KA1997, KA1998, KA1999, KA2000, KA2001, KA2002, KA2003, KA2004, KA2005, KA2006, KAB001, KAE004, KAH003, KAR001, KB0002, KB0003, KB0063, KB0669, KB1182, KB1183, KB1184, KB1185, KB1186, KB1187, KB1188, KB1189, KB1190, KB1191, KB1192, KB1193, KB1194, KB1195, KB1196, KB1197, KB1198, KB1199, KB1200, KB1201, KB1202, KB1610, KB1910, KB1911, KB1939, KB1996, KB1997, KB1998, KB1999, KB2000, KB2000, KB2001, KB2002, KB2003, KB2004, KB2005, KB2006, KBB001, KBE004, KBH003, KBM003, KBR001, KC0002, KC0003, KC1190, KC1910, KCB001, KCE004, KCH003, KCR001


Gloss & Satin Finish Gloss, Satin & Matt Finish Satin Finish
Spearmint Stone Magnolia Silver
Parchment Powder blue Dark Grey Gold
Evergreen Soft Pink Soft Cream
Soft Mint Soft Yellow Old White
Lagoon Pompadour Regency White
Mushroom Ivory Soft White
Butterscotch Blush Light Grey
Green Haze Soft Violet Black
Violet Soft Lime RAL 7016 Anthracite
Ivy Green Plum
Red Cossack Inca
Jade Silk Soft Thyme
Soft Clay Holly
Chocolate Brazil
Oxford Blue Claret


Write Your Own Review

Your Rating