The perfect paint for application onto exterior masonry and brickwork in a bespoke colour to suit you.
A high performance flexible masonry paint. The paint is very high quality with superb weather-resistance. Please note all colours will be made in a satin finish and there will be a lead time of around 2 weeks.
Will flex with the substrate where movement causes cracking in conventional masonry paint. Has the ability to stretch up to 400% of its original dry state. The elastic properties ensure a smooth, flexible finish to your exterior surfaces.
Substrate Suitability: Masonry, Roughcast, Pebbledash, Brickwork, Cladding, Cement, Bricks and Mortar, Concrete Rendered Surfaces
Paint can be applied to previously painted surfaces after suitable preparation.
- Stretches up to 400%
- Smooth finish
- Long lasting
- Fine crack bridging
|Coverage||10m² per litre (depending on substrate and porosity)|
|Application||Brush, Roller, Spray|
|Drying Time||Touch dry in 2; dry to recoat in 4 hours @ 23°C|
|Cleanup||Clean directly after using water|
|Storage||2 years if can kept dry and firmly shut, away from direct sunlight|
|MPN||MB0002, MB0003, MB0415, MB0556, MB0773, MB1864, MB1910, MB1911, MBE004, MBH003, MBK004|
Treat mould and mildew with Fungicidal Wash. Remove all loose, flaky or powdery residues. Porous surfaces should be treated with Stabilising Solution, allowing at least 12 hours drying before coating. Common Fletton Bricks must be dry, and should be treated as porous.
Stir thoroughly and check colour before use.
Apply by brush roller or spray (use HVLP or Airless spray for best results). We recommend using the Rodo Flat Masonry Brush.
Do not apply at temperatures below 10°C or when foggy or likely to rain before the paint has dried. Two coats are recommended for optimum durability. Ensure adequate ventilation during application and drying.
Clean equipment immediately after use with warm soapy water. Remove as much product as possible prior to cleaning.