Bedec Barn Paint Colour Match

Bedec Barn Paint is a highly tough and durable water-based acrylic paint which is ideal for exterior wood, metal and other substrates.

Bedec Barn Paint is available in RAL, British Standard and NCS colours. Also tintable to most other colour ranges. Please enter your colour reference in the colour request field, and if there are any issues we will be in contact to discuss alternatives.

Bespoke colours are not available for next day delivery or paid pre-12 delivery. Please contact hello@allfinishes.co.uk  to check before ordering if the colour can be matched and for the lead time.

Bedec Barn Paint displays outstanding colour retention. Using new water-based technology, the paint flexes with the substrate and is far less likely to crack and flake in comparison to oil-based alternatives. It is perfect for the protection of exterior buildings and structures made from wood, metal and plastic. 

Ideal For

Bedec Barn Paint can be used for painting sheds, fences, gates, and cladding with a vibrant range of design shades. It is also suitable for the below exterior applications:

Guttering, barns, outbuildings, drainpipes, windows, water silos, posts, galvanised steel, horse stables, farm equipment, tanks, doors, garden sheds, cladded industrial & factory units, corrugated metal and metal box cladding.

It goes onto the following substrates: wood, plastic, concrete, weathered galvanised steel, brick and cladding.

Best applied with Prodec Shed and Fence Paint Brush

More Features

• Self-priming (unless applying to bare steel or rusty surfaces. Please prime with Bedec All Metals Primer first.)
• Paints onto pre-painted surfaces (even those coated with weathered bitumen, tar, varnish or creosote).

Technical Information

Useful Documents

Product Information (466kb PDF)
Safety Data Sheet (207kb PDF)
Bedec Product Range (1.1Mb PDF)

Preparation

Carry out any structural repairs prior to application. The substrate must be sound, dry and free from oil and grease:

1. Carry out cleaning with a liquid detergent solution rinsed with clean water.
2. Allow to dry. 
3. Brush clean surfaces contaminated with lichen or moss. 
4. Treat with an Anti-Fungal and wash until clean. 
5. Allow to dry. 

• Plastic, metal, timber and smooth surfaces should be rubbed down with abrasive paper or equivalent.
• Prime bare steel and rust with Bedec All Metals Primer after appropriate preparation. 
• Treat stains with a Stain Block prior to painting. 
• Allow new creosote (3 weeks) and galvanised (1 month) to 'weather' before painting.

Application

For a complete guide please check out our blog - How to paint a wooden barn

Apply by brush (we recommend the Rodo Prodec Premier Synthetic Paint Brush), roller or conventional/airless spray. It can be applied to previously painted surfaces.

No primer or undercoat is necessary unless used on ferrous metal (mild steel) or where staining could occur.

For porous substrates, thin the first coat with 30% water (this will act as a self-primer). Do not apply at temperatures below 8ºC. Avoid applying in foggy conditions, or if rain looks likely.  Use two full coats for most effective and aesthetic protection.

Coverage:

Approximately 12–14 m²/litre when applied by brush or roller (dependent on texture and porosity of substrate).

Please note that airless spraying will considerably reduce this to 6–8 m²/litre.

Aftercare

Touch dry in approximately 2 hours, normally ready for the next coat after 4 hours at 18°C and 65% RH. Optimum hardness is reached after 2 weeks. Ensure good ventilation during application and drying. This ensures superior protection of the substrate rather than flake or crack that you could receive with an inferior product.

Clean up with warm soapy water.

Tips

When it comes to painting your barn black, Satin is generally the recommended choice of finish due do its increased longevity when compared to Matt black. Satin sheds water more effectively and the soft sheen reflects light beautifully. Semi-gloss will however last the longest as the super smooth surface allows water to simply bead off. This greatly reduces the change of water damage to the timber. 

Aesthetically there are often requirements for replicating the appearance of Creosote, in which case Matt black will be the best option for you. 

Colours and Finishes Available