Bedec Acrylic Floor Paint
Protect and Enhance Your Interior Wooden & Concrete Floors. Self-Priming Finish.
High build, acrylic resin floor paint that gives a tough finish excellent durability. Ideal as a decorative & protective coating for cement, rendering, concrete, stone, M.D.F., chipboard, hard and soft wood. Also suitable for most types of plastic.
PLEASE ALLOW 2-3 WORKING DAYS DELIVERY TIME FOR 20L DRUMS.
Substrate Suitability: Hardwoods, Softwoods, Concrete, New Concrete, M.D.F, Stone, Rendering, Chipboard, Plastics (most types)
Advantages
- Low odour
- Slip resistant with enhanced grip
- Protects and improves the look of your floor
- Makes it easy to remove dirt, dust, oil & grease
- Perfect for identification areas and demarcation zones
- Reduces the need for dusting and damage to equipment
Technical Information
Brand | Bedec |
---|---|
Coverage | 8–10m² per litre (depending on substrate and porosity) |
Application | Brush, Roller |
Drying Time | Touch dry in 2–4 hours; dry to recoat in 16 hours @ 23°C |
Coats | 2 coats |
Cleanup | Clean directly after using water |
Storage | 2 years if can kept dry and firmly shut, away from direct sunlight |
VOC | 60g/l |
Material | Waterbased acrylic |
MPN | FF0000, FF0002, FF0003, FF0004, FF1487, FFA004, FFB001, FFD007, FFS005, |
Documentation
Product Information (74kb PDF)
Safety Data Sheet (207kb PDF)
Bedec Product Range (1.1Mb PDF)
Preparation
Surfaces must be clean, dry and free from wax, grease and oil. Remove all dust and loose particles. New concrete should be allowed to thoroughly cure before coating. On existing painted surfaces, remove all loose and flaking paint, and thoroughly rub down with abrasive paper.
Plastic surfaces should be cleaned with a soapy solution, rinsed, allowed to dry and lightly rubbed down with fine abrasive paper.
Application
Stir thoroughly before use. Apply by brush, or for larger areas, lambswool roller. On new or porous surfaces, seal the surface by thinning the first coat 30% with clean water, following with one or two coats as necessary.
DO NOT APPLY AT TEMPERATURES BELOW 8°C.
Aftercare
The coated surface should not be treated with strong alkali (caustic) cleaners. Clean by mopping lightly with a weak detergent solution (ie washing up liquid in water), rinse and dry do not leave surface wet for prolonged periods.
Product Numbers
Manufacturer's Part Numbers (MPN):
FF0003/5, FFD007/5, FF0000/5, FFS005/5, FFB001/5, FF0004/5, FF0002/5, FFA004/5, FF1487/5